ABC of Safety in the Biological Sciences - Luxol Fast Blue

 

ABC of Safety in the Biological Sciences

 


 

LUXOL FAST BLUE (No Colour Index No.) (C102H97N19O13S4)

SYNONYMS
Solvent blue 38, azosol fast blue HLR, MLB, luxol fast blue MBS or MBSN.
GENERAL PRECAUTIONS
Avoid skin and eye contact.
Avoid inhalation or ingestion of the powder.
Avoid creating dust.
Keep away from heat.
Wash hands thoroughly after handling.
CHARACTERISTICS
Blue powder. Copper phthalocyanin dye.
HEALTH HAZARD DATA
There is insufficient data available on the toxic effects of this dye. Other dyes in this group are severe irritants and the powders are flammable.
TREATMENTS
Skin ­ immediately remove contaminated clothing and wash the affected area with soap or mild detergent and large amounts of water until all evidence of the chemical has been removed (approximately 15 minutes). If irritation persists seek medical attention. Wash contaminated clothing before re­use.
Eyes ­ immediately wash the affected eye with large amounts of water until all evidence of the chemical has been removed (approximately 15 minutes). If irritation or pain persist seek medical attention.
Inhalation ­ remove from the area of exposure to fresh air. If breathing has ceased apply artificial respiration. Keep warm and allow to rest. If irritation persists or develops seek medical attention.
Ingestion ­ wash out the mouth thoroughly with water and give water to drink. Induce vomiting by touching a finger to the back of the throat, then seek immediate medical advice.
INCOMPATIBILITY
Heating produces toxic fumes of carbon, nitrogen, sulphur and chlorides. The dust forms explosive mixtures with air.
STORAGE
Store in a cool, dry atmosphere away from heat.
HANDLING
Use a fume hood to minimise exposure to this substance. Wear protective clothing. A long sleeved laboratory coat or gown, rubber gloves, safety goggles and a face mask as a minimum standard.
DISPOSAL
WEAR:
Leather gloves, heavy face shield and laboratory coat. Work from behind a barricade (body shield or wall). Avoid unnecessary heat, friction or impact.
SPILLS:
Absorb the liquid with paper or vermiculite. If it is a solid, dampen then brush on to paper with great care. Place in a plastic bag and remove outside for burning.
OR
Sponge up with water, followed by decontamination with 10% ammonium ceric nitrate solution. 'Kill', by adding to a greater stoichiometric amount of ammonium ceric nitrate solution with agitation sufficient to provide suspension of all solids. Cool the reaction. The organic azides and heavy metal azides are explosive. Alkali and alkaline earth azides are not considered explosives under normal laboratory conditions. Keep the stock of azides very low. Stamp the date of receipt upon the package.
ENVIRONMENT:

 


BACK to the top of the Glossary Contents List
BACK to the top of the Chemical Contents List

REFERENCES