Abcam Ad

Author Topic: urgent !!! image document form question  (Read 4946 times)

0 Members and 1 Guest are viewing this topic.

Offline apple

  • GoldMember
  • *****
  • Posts: 150
urgent !!! image document form question
« on: February 15, 2006, 02:32:48 PM »
Hi Everybody here,

In terms of photo quality, my photoes are 24 or 36 bits per pixel. Is it different 300 d. p. i. ? If so, how to transform between?
I use Spot 3.2.4 software taking my photoes.

Many thanks

Apple

urgent !!! image document form question
« on: February 15, 2006, 02:32:48 PM »

Offline hokie

  • SuperTech
  • ****
  • Posts: 43
    • Stereothena Inc
DPI vs BPP
« Reply #1 on: May 24, 2006, 09:24:52 AM »
Bits per pixel is a measure of the detail for each dot in a picture. A 24 bit picture usually has 8 bits for red, green, and blue. A 32 bit picture adds 8 bits for a transparency value called the alpha value. 8 bits means that the range of color is from 0 to 255.

The DPI is dots per inch. That is how dense the pixels are printed on a page. If your picture is 1000 pixels acrossnad you print it at 300 DPI it takes just 10/3 inches or about 8 cm of paper to print.

The limitations of the human eye, and the monitor, and especially the printer mkae the use of 8 bits reasonable. It is usually possible to rescale the images to different sizes on the printer. Printers have a substantially smaller color range than do monitors. Do not expect the images to be as sharp or clear as they are on the monitor.
Do more, less well. ~Ewald Weibel

DPI vs BPP
« Reply #1 on: May 24, 2006, 09:24:52 AM »